P6 |
Identify the main performance criteria relating to the specification of a range of vocationally relevant construction materials |
P7 |
Describe the production and/or manufacturing processes for two vocationally relevant construction materials |
P8 |
Describe the important features and properties of construction related materials |
P9 |
Explain how construction materials can deteriorate in use |
P10 |
Explain the preventive and remedial techniques used to prevent deterioration of construction materials. |
M3 |
Make and support valid decisions relating to the specification of materials for a tutor-provided application |
D2 | Evaluate preventative and remedial techniques applicable to the failure of materials |
P6
Identify four of the main performance criteria relating to the specification of four of the following; brick, cement, timber, glass, steel, asphalt and expanded foam board. If you wish to choose a different material then discuss this with your tutor. Note: you must choose four performance criteria for each of the four materials. This task can be presented in the form of a table.
|
P7
Prepare an illustrated power point presentation which describes the manufacture of two of the following; sawn timber, cement powder, glass, steel, expanded foam board, uPVC, asphalt or brick. Reference should be made to the embodied energy arising from manufacturing and/or harvesting, processing and transport. If you wish to choose a different material then discuss this with your tutor.
|
P8
Describe four of the most important properties of four of the following; brick, cement, timber, glass, steel, asphalt and expanded foam board. If you wish to choose a different material then discuss this with your tutor. Note: you must choose four properties for each of the four materials. This task can be presented in the form of a table. |
P9
Explain how brick, timber, steel and paint fail / deteriorate. |
P10
Explain the preventative and remedial techniques used to prevent failure / deterioration of brick, timber, steel and paint. |
M3
Make and support valid decisions relating to the specification of materials for a high risebuilding. Decisions must be supported by reference to the features and properties of the materials and required performance criteria. Choose materials for the foundations, structural frame, cladding, a flat roof and below ground drainage.
|
D2
Evaluate preventative and remedial techniques capable of preventing the failure of the materials listed in P10
|