Electrical Engineering paper help-MATLAB project
Department of Electrical and Computer Engineering, Tuskegee University
EENG 0323: Signals and Systems, Fall 2018
Project-1
Total Points: 100,
Project Statement/Problem
Using MATLAB, create and plot the following signals for time = −10 to = 10.
a) 1() = −0.2
b) 2() = 1 − −0.2
c) 3() = 0.2
d) 4() = 1 − 0.2
e) 5() = cos(0.5)
f) 6() = −0.2 cos(0.5)
g) 7() = +−
2
h) 8() = −−
2
i) 9() = [
2 ]
j) 10() = cos(0.5) × [
2 ]
k) 11() = ∑ [ −4
2 ]2=−2
l) 12() = cos(0.5) × ∑ [ −4
2 ]2=−2
Other Instructions
• Create one single m-file and include the coding for all twelve signals in the same file. Save
your m-file as Project1_LastName_FirstName.m.
• Run the file to generate the outputs/plots. Remember to include ‘grid’, and appropriate/relevant
‘axes labels’ and ‘title’ in each plot.
• Put the complete code and the corresponding outputs (plots) in a Word document. Include
figure captions, as/if needed.
• Submit the printed/paper version of the word document (project report) with a cover page
within the deadline.
• Email the m-file (actual MATLAB code) to the instructor within the deadline.
Warning
• Each student must do his/her own project.
• Any trace of copying/plagiarism (from others or from internet) will result in zero points/credit
in the project.
• If two or more projects (codes, report) can be identified as having traces of copying/plagiarism
from each other, all those project works/reports will get zero points/credit.