Perform the energy balance and a second-law analysis/Chemical Engineering
Problem 6.40:
Design a Linde process to liquefy oxygen. Pure oxygen is supplied at 1 bar, 25 °C and liquid oxygen is received at 1 bar. The fluid is compressed to 150 bar in a series of compressors whose efficiency is 80%. Precooling is done by water at 20 °C. Compression in done in stages with intercooling, to maximum temperature of 200 °C. Perform the energy balance and a second-law analysis of the process.
Problem 6.41:
Oxygen is compressed from 1 bar, 25 °C, to 150 bar. To avoid overheating, compression is done in stages followed by intercooling with water at 30 °C so that the temperature exiting each stage of the compressor does not exceed 200 °C. Using data from the NIST WebBook, determine the number of stages, the work in each stage, and the amount of cooling, if the efficiency of all stages is 80
